https://www.youtube.com/watch?v=rWVycZsKrEU
You Need To Have The Following ļ¼
1. ODIS-E , ODIS- Can Remove SFD -
2. Rear Viewer Camera Calibration Tool VAS6350
orange/grey --------------------- J533 T32/7
orange/brown--------------------- J533 T32/6
Brown ----- GND
red yellow ----------- J533/1
6C long code : 02038004E43000(RHD) /
02034010260C0000(LHD) 02030004E43000
==========================
For cars without parking sensors. Front and rear.
You have to set pdc to active in 5F
so mmi screen switch when put in reverse
Vehicle menu command-menu_display_pdc over threshold ---- active
Vehicle menu command-menu PaCo ------ activated
Vehicle menu command-menu_PaCo_over_threshold -----active
Vehicle menu command-menu display pdc --- avtive