Compatible Vehicles
This product is compatible with most standard models. Please confirm your vehicle year, model, and connector port before installation.
Factory TPMS RDK Programming & Wiring Reference
Official coding & wiring guide for direct TPMS retrofit, cancel factory indirect tire pressure monitoring.
Module Coding Settings
03 - ABS Module (SFD Coding)
Byte25: Deselect Bit2 / Bit3 / Bit4
Byte27: Deselect Bit4
17 - Instrument Cluster (SFD Coding)
Tire monitor function activated
Original factory indirect tire pressure function cancelled
19 - Gateway Module (SFD Coding)
Enable register 65 – Tire Pressure Control Unit
5F - Infotainment Main Unit
RDK function match completed, 0x07 parameter activated
Plug Wiring Definition (T4 Connector)
T4/2 → Power Supply SC43
T4/4 → Ground (GND)
T4/1 → Gateway T32/8 (CAN-Low)
T4/3 → Gateway T32/9 (CAN-High)
All coding parameters pre-verified for MQB platform models, ensures plug-and-play after correct wiring & programming.
Note: Professional installation is highly recommended. Read the manual carefully before installation.