Suitable for auto air-conditioning modification.
After replacement. You need to use a computer to modify code.
Golf 7 version not support rear air conditioning(Golf 7 no rear)
CODE :
This in adaptation：
"AC Compressor First Run-In" Steps:
Start engine and allow it to Idle.
Adapt flap end stops as described above.
[Basic Settings - 04]
Select "Compressor Run In; Automatic Start" from the drop-down list.
It will show completed, but wait 120 sec (2 Min) and observe the flashing A/C button light on the HVAC panel.
After the Basic Settings has completed, the A/C light will quit flashing and the fault code will clear.
Note: If Basic Settings reports Error the module may need to see an Adaptation change before this can be completed. Go to Adaptation and change the Runtime (or Driving time) for "compressor run-in" basic setting from 120 -to- 120 and save it followed by repeating the procedure.
Tick on off this box. Different combination - will work
Note 1 : If Basic Settings still reports Error change again driving time from 120 to 120 and will find in adaptation onother field with value 60. Do same and change 60 with 60 and then do first run.
INSTALL PROBLEM FAQ :
Q : " MENU " BUTTON PRESS NOT WORKING
A :5F adaptation -- search 0×01 & 0×02 & 0×03 active all
USD
