By Patrick | 06 May 2020 | 3 Comments

TPMS 2 INSTALL MQB



ORANGE/GREY CAN + (CAN HIGH) ------------------------------ T20/17
ORANGE/BROWN CAN - (CAN LOW ) ------------------------------ T20/7
WHITE/BLACK ------ POWER
BROWN -------- GND















2. After installation is completed, increase the tire pressure to about 3.0
3. Use ODIS to delete the 65 tire pressure module fault
4. Turn the vehicle key power on/off and keep the vehicle powered on (do not start the engine).
5. Adjust the instrument to the tire pressure interface, and continue to deflate the left front wheel quickly until the instrument displays the left front tire pressure value.
6. Turn the key power on/off once, adjust the instrument to the tire pressure interface, and continue to deflate the right front wheel quickly until the instrument displays the left front tire pressure value.
7. Turn the key power on/off once, adjust the instrument to the tire pressure interface, and continue to deflate the right rear wheel quickly until the instrument displays the left front tire pressure value.
8. Turn the key power on/off once, adjust the instrument to the tire pressure interface, and continue to deflate the left rear wheel quickly until the instrument displays the left front tire pressure value.
9. Finally, adjust the four tire pressures to the required values, and then the matching is completed.

Recently Reviews

Jorge
I want buy a tpms for touareg 2014. You can help me to install?
November 15,2022 13:41
Pawel
The module installation position is for VW passat not Audi A5/S5 B9. It has a totally different position of the module. It would be nice to see a complete installation guide. Also CanBus connection "For High Version" no sure what high version means.
January 31,2022 10:39
Anton
Hi Whare i neet to connect the module Thanks
August 13,2020 01:57

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code
Click to verification
Slide to verification