PASSAT B8 T-ROC POLO AW HIGHLINE CAMERA INSTALL

How did I connect the camera?

In order to work properly, the camera requires the connection of the following wires:

• 2 CAN signal wires (for communication) – Orange+Purple (CAN High) and Orange+Brown (CAN Low)
• 2 video signal wires – Black and Transparent
• 2 power wires – White (+12V) and Brown (GND)
• Flip motor power conversion (T2/1 and T/2)

How did I coding the camera?

1. Register the 6C module in the gateway

2. if you have installed parking assistance system please code " 76 "  . tick rear camera installed . 

3. Module 6C code :  (i already do it before send out ) 
4.Finally you have to enter the Module 5F

Adaptation Search for

Car_Funktion_List_BAP_Gen2_VPS_0x0B Switch to activated

Car_Funktion_List_BAP_Gen2_VPS_0x0B_msg_bus dial terminal 15

5. Rest 5F radio unit .